Diamond Blades to Cut Stone

How To Cut Stones With Diamond Saw Blades

The hardest substance i.e. diamond is not just limited to beautiful jewellery but can also be used for cutting stones and concrete. Bridge saw blades, turbo rim blades, circular saw blades, diamond jigsaw blades etc provide smooth, cleaner cuts and therefore are widely used in the construction industry. When using a diamond saw blade, you need to take care of two things: the material for developing the blade and pressure to be applied with the body. If you want to cut stones, bricks and other abrasive material, you don’t need to worry about your strength but need to select the best diamond saw blade.

Tips To Use Diamond Blades

Diamond saw blades are one of the best tools for cutting ceramic, asphalt, stones and other tough materials in the semiconductor industry, construction industry as well as in the gem industry. Not all diamond blades are the same but some blades are effective for cutting stones while other blades are used for cutting concrete, bricks and more. As we have different types of diamond blades such as turbo rim, continuous rim and segmented rim, so we must follow crucial tips which can help us achieving the best type of performance:

Select The Right Blade – Whether you want to cut hard material like diamond or thick material like glass, you must choose an accurate blade. The blade buying guide can definitely help you in selecting a correct blade.

Use Protective Tools – No one likes to get hurt especially while working with blades in the construction industry. Thus, it is essential to have safety gear before cutting stone, bricks with diamond saw blades. Tools such as helmets, boots, ear defenders and gloves provide utmost security in the manufacturing industry.

Inspect Different Types Of Cutting – Dry and Wet Cutting can both be dangerous if not followed right steps. You must check with a professional before cutting stones and tough materials in wet conditions. When using a dry cutting technique, there is a risk of accumulation of silica dust. So, make sure to wear the correct protection mask when working with diamond blades.

How To Cut Stones With Large Diamond Saw Blades

Step -1 If you are using diamond saw blades for the very first time, you must rotate the blades for more than 30 minutes. Then, you should feed the water under hot weather. With this, the segmented saw blades intensity is kept high under high speed.

Step -2 According to the dimensions of stone, the fall and rise of the diamond blade must be in precise range. Before starting cutting, you need to make sure that the distance between the stone block and segment is 15-20mm. When cutting direction is changed, this distance should be 150-200mm.

Step-3 – Cut the stones with diamond saw blades having blocks bigger than 0.4 cubic metres. This can help to avoid any vibration which can occur due to the symmetrical position of the stone block.

Step-4 Like the steady start given before cutting, in the end also blades don’t need to be stopped at once. Until the diamond blade is out of the block, just keep it moving.

I am sure you have cut the material precisely in a lesser amount of time.

Conclusion

It is important to maintain the specific distance between the block and the segment in different phases of cutting. Whether you are a beginner or a professional, you must wear protective equipment while using diamond saw blades.With this, you can prevent injuries but can also cut stones and concrete with superior quality.